G’day I’m Andrew Your Local TV Booster Installer
TV Reception Problems? Weak Or No Signal?
Are you tired of losing channels or the picture breaking up during your favourite show? Then you might need a TV Booster Installation
TV Signal boosters—most commonly masthead and distribution amplifiers—are sometimes used in antenna systems to increase the strength of signals received at a television tuner.
TV Booster Installation Options
- VHF/UHF masthead amplifier
- LTE/4G filtering
- F type connections
- 100% weatherproof case
- Same Day Install Available
- VHF/UHF masthead amplifier
- LTE/4G filtering
- F type connections
- 100% weatherproof case
- Same Day Install Available
- UHF signal boosters
- UHF for Rolystone and Scarborough
- FM boosters digital radio
- Upgrade and repair your system
- Get the best signal today!
TV Signal Booster Installation Perth
Got weak signal, extra TV points, or a long cable run? We do TV signal booster installation in Perth and we test first so you don’t get sold an amplifier you don’t need.
If a masthead amplifier, distribution booster, or filter will fix the problem, we’ll fit the right gear and set it up properly. If the real issue is the antenna or cabling, we’ll tell you straight.
Call (08) 9273 4019 for a quick signal test booking or booster quote.
? TV Signal Booster Installation Perth
Splitting your antenna signal to multiple TVs? Living in a weak reception area? Every time you add a TV point or run a long cable, you lose signal strength. A TV booster (amplifier) brings that signal back up to full strength so every TV in your house gets a clear, sharp picture.
But here’s the thing — a booster isn’t always the answer. If your signal is already weak or noisy, amplifying it just gives you a louder version of a bad picture. That’s why we test first and recommend the right solution, not just slap a booster on and hope for the best.
? Types of Boosters We Install
❓ Booster FAQs
Do I need a booster?
If you have more than 2 TV points, you probably do. Every split reduces your signal by half. We test the signal at each TV point and only recommend a booster if the numbers say you need one.
Can a booster cause problems?
Yes — over-amplification is real. Too much signal is just as bad as too little. It causes pixelation and dropouts that look identical to weak signal. That’s why professional installation matters — we set the gain correctly for your specific setup.
My booster stopped working — do they wear out?
Boosters last 5–10 years typically. Power surges from lightning can kill them instantly. If yours has died, we can test and replace it quickly — we always carry common models in the van.
? Do You Need a TV Booster or a New Antenna?
Before you spend money on a TV signal booster, it’s worth knowing whether a booster will actually fix your problem — because sometimes it won’t.
A booster helps when: Your antenna is in good condition and aimed correctly, but the signal loses strength by the time it reaches your TV. This happens when you’re running long cable runs, splitting to multiple TV points, or your home is on the fringe of a transmitter’s coverage area. A booster amplifies the existing signal so it arrives at your TV strong enough for a clean picture.
A booster won’t help when: The signal at the antenna is already weak or full of interference. Boosting a bad signal just amplifies the noise along with it — you’ll get a louder version of the same garbage. If your antenna is old, damaged, or aimed at the wrong transmitter, you need a new antenna, not a booster. We test before we install, so you won’t pay for a booster you don’t need.
⚙️ Types of TV Signal Booster
? TV Booster Installation Perth — from $199
Price includes the amplifier unit, installation, power supply, and before-and-after signal testing at every TV point. We don’t guess — we measure. If the signal is stronger after the booster goes in, you’ll see the numbers on our meter. If a booster isn’t the right fix, we’ll tell you what is before you spend a cent.
We install TV signal boosters across all Perth metropolitan suburbs. Same-day service available — call us and we can usually have it sorted by this afternoon.
❓ TV Booster FAQs
What’s the difference between a masthead amplifier and a distribution amplifier?
A masthead amplifier sits on the roof at the antenna and boosts the signal before it travels down the cable — best for weak signals. A distribution amplifier sits inside the house and splits the signal to multiple TV points while maintaining strength — best for homes running 4 or more TV outlets.
Can a TV signal booster fix pixelation?
It depends on the cause. If pixelation is caused by a weak signal that’s losing strength over a long cable run or through splitters, yes — a booster will fix it. If the pixelation is caused by a faulty antenna, damaged cable, or interference, a booster won’t help. We test the signal at the antenna first to determine the actual cause before recommending a booster.
How many TV points can a booster support?
A good distribution amplifier can comfortably support 6–8 TV points from a single antenna. For larger homes or commercial setups, we can install higher-output amplifiers that handle even more. We test signal strength at every outlet after installation to make sure every TV gets a solid picture.
We Have Offers for You
